Ventricular interaction and septal deformation: A model compared with experimental data

R. Beyar, S. J. Dong, E. R. Smith, I. Belenkie, J. V. Tyberg

Research output: Contribution to journalArticle

Abstract

Diastolic ventricular interaction is associated with septal shift and deformation, the consequences of which have not been fully assessed. A model was therefore developed to describe the mechanisms involved in interaction between the ventricles under different loading conditions. We assumed a circular cardiac minor-axis geometry surrounded by a pericardial membrane with the left ventricle (LV) and septum described by three layers. To define the equilibrium condition, we required the net force-balance at the right ventricular (RV)-LV intersection points to equal zero. The model was tested with and without consideration of bending forces associated with a change of curvature of a thick-walled structure. Model results were compared with data from animal experiments subjected to aortic and pulmonary constriction. LV and RV end-diastolic pressures as well as pericardial pressure were measured. In six dogs, septal segment length was measured using sonomicrometry, and in seven dogs, endocardial curvature was measured using echocardiography. Model and experimental results show that 1) with severe RV loading, septal inversion occurs at a negative transseptal gradient, and 2) the end-diastolic septal segment length continues to shorten after septal inversion during pulmonary constriction. Model simulation suggests that bending moments account for the septal curvature at zero transseptal pressure. In addition, the model predicts the shift in the pressure-area relationship of each ventricle by a change in loading of the opposite ventricle and predicts that large transmural gradients in stress and strain are associated with septal inversion. Thus the model and the experimental data agree and describe the important factors that modulate diastolic septal mechanics during acute differential ventricular loading.

Original languageEnglish (US)
JournalAmerican Journal of Physiology - Heart and Circulatory Physiology
Volume265
Issue number6 34-6
StatePublished - 1993
Externally publishedYes

Fingerprint

Heart Ventricles
Pressure
Constriction
Theoretical Models
Dogs
Lung
Mechanics
Echocardiography
Blood Pressure
Membranes

Keywords

  • pulmonary constriction
  • septal shift
  • ventricular interdependence

ASJC Scopus subject areas

  • Physiology

Cite this

Ventricular interaction and septal deformation : A model compared with experimental data. / Beyar, R.; Dong, S. J.; Smith, E. R.; Belenkie, I.; Tyberg, J. V.

In: American Journal of Physiology - Heart and Circulatory Physiology, Vol. 265, No. 6 34-6, 1993.

Research output: Contribution to journalArticle

Beyar, R. ; Dong, S. J. ; Smith, E. R. ; Belenkie, I. ; Tyberg, J. V. / Ventricular interaction and septal deformation : A model compared with experimental data. In: American Journal of Physiology - Heart and Circulatory Physiology. 1993 ; Vol. 265, No. 6 34-6.
@article{fc25b4bc8ba44eab97947dd34dba8dff,
title = "Ventricular interaction and septal deformation: A model compared with experimental data",
abstract = "Diastolic ventricular interaction is associated with septal shift and deformation, the consequences of which have not been fully assessed. A model was therefore developed to describe the mechanisms involved in interaction between the ventricles under different loading conditions. We assumed a circular cardiac minor-axis geometry surrounded by a pericardial membrane with the left ventricle (LV) and septum described by three layers. To define the equilibrium condition, we required the net force-balance at the right ventricular (RV)-LV intersection points to equal zero. The model was tested with and without consideration of bending forces associated with a change of curvature of a thick-walled structure. Model results were compared with data from animal experiments subjected to aortic and pulmonary constriction. LV and RV end-diastolic pressures as well as pericardial pressure were measured. In six dogs, septal segment length was measured using sonomicrometry, and in seven dogs, endocardial curvature was measured using echocardiography. Model and experimental results show that 1) with severe RV loading, septal inversion occurs at a negative transseptal gradient, and 2) the end-diastolic septal segment length continues to shorten after septal inversion during pulmonary constriction. Model simulation suggests that bending moments account for the septal curvature at zero transseptal pressure. In addition, the model predicts the shift in the pressure-area relationship of each ventricle by a change in loading of the opposite ventricle and predicts that large transmural gradients in stress and strain are associated with septal inversion. Thus the model and the experimental data agree and describe the important factors that modulate diastolic septal mechanics during acute differential ventricular loading.",
keywords = "pulmonary constriction, septal shift, ventricular interdependence",
author = "R. Beyar and Dong, {S. J.} and Smith, {E. R.} and I. Belenkie and Tyberg, {J. V.}",
year = "1993",
language = "English (US)",
volume = "265",
journal = "American Journal of Physiology",
issn = "0363-6135",
publisher = "American Physiological Society",
number = "6 34-6",

}

TY - JOUR

T1 - Ventricular interaction and septal deformation

T2 - A model compared with experimental data

AU - Beyar, R.

AU - Dong, S. J.

AU - Smith, E. R.

AU - Belenkie, I.

AU - Tyberg, J. V.

PY - 1993

Y1 - 1993

N2 - Diastolic ventricular interaction is associated with septal shift and deformation, the consequences of which have not been fully assessed. A model was therefore developed to describe the mechanisms involved in interaction between the ventricles under different loading conditions. We assumed a circular cardiac minor-axis geometry surrounded by a pericardial membrane with the left ventricle (LV) and septum described by three layers. To define the equilibrium condition, we required the net force-balance at the right ventricular (RV)-LV intersection points to equal zero. The model was tested with and without consideration of bending forces associated with a change of curvature of a thick-walled structure. Model results were compared with data from animal experiments subjected to aortic and pulmonary constriction. LV and RV end-diastolic pressures as well as pericardial pressure were measured. In six dogs, septal segment length was measured using sonomicrometry, and in seven dogs, endocardial curvature was measured using echocardiography. Model and experimental results show that 1) with severe RV loading, septal inversion occurs at a negative transseptal gradient, and 2) the end-diastolic septal segment length continues to shorten after septal inversion during pulmonary constriction. Model simulation suggests that bending moments account for the septal curvature at zero transseptal pressure. In addition, the model predicts the shift in the pressure-area relationship of each ventricle by a change in loading of the opposite ventricle and predicts that large transmural gradients in stress and strain are associated with septal inversion. Thus the model and the experimental data agree and describe the important factors that modulate diastolic septal mechanics during acute differential ventricular loading.

AB - Diastolic ventricular interaction is associated with septal shift and deformation, the consequences of which have not been fully assessed. A model was therefore developed to describe the mechanisms involved in interaction between the ventricles under different loading conditions. We assumed a circular cardiac minor-axis geometry surrounded by a pericardial membrane with the left ventricle (LV) and septum described by three layers. To define the equilibrium condition, we required the net force-balance at the right ventricular (RV)-LV intersection points to equal zero. The model was tested with and without consideration of bending forces associated with a change of curvature of a thick-walled structure. Model results were compared with data from animal experiments subjected to aortic and pulmonary constriction. LV and RV end-diastolic pressures as well as pericardial pressure were measured. In six dogs, septal segment length was measured using sonomicrometry, and in seven dogs, endocardial curvature was measured using echocardiography. Model and experimental results show that 1) with severe RV loading, septal inversion occurs at a negative transseptal gradient, and 2) the end-diastolic septal segment length continues to shorten after septal inversion during pulmonary constriction. Model simulation suggests that bending moments account for the septal curvature at zero transseptal pressure. In addition, the model predicts the shift in the pressure-area relationship of each ventricle by a change in loading of the opposite ventricle and predicts that large transmural gradients in stress and strain are associated with septal inversion. Thus the model and the experimental data agree and describe the important factors that modulate diastolic septal mechanics during acute differential ventricular loading.

KW - pulmonary constriction

KW - septal shift

KW - ventricular interdependence

UR - http://www.scopus.com/inward/record.url?scp=0027767550&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0027767550&partnerID=8YFLogxK

M3 - Article

C2 - 8285243

AN - SCOPUS:0027767550

VL - 265

JO - American Journal of Physiology

JF - American Journal of Physiology

SN - 0363-6135

IS - 6 34-6

ER -