SU‐FF‐J‐75: Geometric Calibration of An Extended View C‐Arm Platform for Cone‐Beam CT

Y. Cho, S. Kim, Jeff Siewerdsen, D. Moseley, D. Jaffray

Research output: Contribution to journalArticle

Abstract

Purpose: A mobile C‐arm with a versatile detector mount (providing extended field‐of‐view) has been developed for multi‐mode fluoroscopy and cone‐beam CT image‐guidance of surgical procedures. Geometric calibration estimating a set of parameters that fully describe the geometry of the systems is essential for the accurate image reconstruction and precise surgical guidance. We have developed a general analytic method to calibrate this system. Method and Materials: The platform for the extended view C‐arm for Cone‐beam CT is a Siemens PowerMobil. Field of view can be extended originally from 18×24 to 18×40 cm2 with the computer controlled linear guide system attached to the arm to displace the position of the imaging detector. It allows imaging objects such as pelvis of patients on C‐arm. The calibration phantom, modified to fit in the field of view, consists of 16 ball bearings precisely located in two circular trajectories in a cylindrical plastic phantom. All the geometric parameters including source position, and detector position and rotation with respect to gantry angle are found at various detector shifts. The calibration algorithm previously developed and verified at the cone‐beam CT systems on optical bench and clinical linear accelerator was applied. Results: The uncertainty of the calibration algorithm is less than 0.6° (out of plan) and 0.01° (in plan) in detector angles, 0.01mm (normal to the beam direction) and 1.4mm (beam direction) in x‐ray source/detector position. Repeatability of the center of the detector in various gantry angle and detector shift was less than 1 pixel size. Optimal weight of the counter valance for precise motion of the extended view C‐arm was also found using the calibration parameters. Conclusion: Overall, a robust method has been developed for an accurate geometric calibration of systems demonstrating non‐ideal trajectory. This will allow an accurate cone‐beam CT reconstruction and manual/robot‐assisted image guided surgical procedures.

Original languageEnglish (US)
Pages (from-to)1937
Number of pages1
JournalMedical Physics
Volume32
Issue number6
DOIs
StatePublished - 2005
Externally publishedYes

Fingerprint

Calibration
Optical Devices
Particle Accelerators
Computer-Assisted Image Processing
Fluoroscopy
Pelvis
Plastics
Uncertainty
Arm
X-Rays
Weights and Measures
Direction compound

ASJC Scopus subject areas

  • Biophysics
  • Radiology Nuclear Medicine and imaging

Cite this

SU‐FF‐J‐75 : Geometric Calibration of An Extended View C‐Arm Platform for Cone‐Beam CT. / Cho, Y.; Kim, S.; Siewerdsen, Jeff; Moseley, D.; Jaffray, D.

In: Medical Physics, Vol. 32, No. 6, 2005, p. 1937.

Research output: Contribution to journalArticle

Cho, Y. ; Kim, S. ; Siewerdsen, Jeff ; Moseley, D. ; Jaffray, D. / SU‐FF‐J‐75 : Geometric Calibration of An Extended View C‐Arm Platform for Cone‐Beam CT. In: Medical Physics. 2005 ; Vol. 32, No. 6. pp. 1937.
@article{98feeaa92a524c21905b41add13ae5a9,
title = "SU‐FF‐J‐75: Geometric Calibration of An Extended View C‐Arm Platform for Cone‐Beam CT",
abstract = "Purpose: A mobile C‐arm with a versatile detector mount (providing extended field‐of‐view) has been developed for multi‐mode fluoroscopy and cone‐beam CT image‐guidance of surgical procedures. Geometric calibration estimating a set of parameters that fully describe the geometry of the systems is essential for the accurate image reconstruction and precise surgical guidance. We have developed a general analytic method to calibrate this system. Method and Materials: The platform for the extended view C‐arm for Cone‐beam CT is a Siemens PowerMobil. Field of view can be extended originally from 18×24 to 18×40 cm2 with the computer controlled linear guide system attached to the arm to displace the position of the imaging detector. It allows imaging objects such as pelvis of patients on C‐arm. The calibration phantom, modified to fit in the field of view, consists of 16 ball bearings precisely located in two circular trajectories in a cylindrical plastic phantom. All the geometric parameters including source position, and detector position and rotation with respect to gantry angle are found at various detector shifts. The calibration algorithm previously developed and verified at the cone‐beam CT systems on optical bench and clinical linear accelerator was applied. Results: The uncertainty of the calibration algorithm is less than 0.6° (out of plan) and 0.01° (in plan) in detector angles, 0.01mm (normal to the beam direction) and 1.4mm (beam direction) in x‐ray source/detector position. Repeatability of the center of the detector in various gantry angle and detector shift was less than 1 pixel size. Optimal weight of the counter valance for precise motion of the extended view C‐arm was also found using the calibration parameters. Conclusion: Overall, a robust method has been developed for an accurate geometric calibration of systems demonstrating non‐ideal trajectory. This will allow an accurate cone‐beam CT reconstruction and manual/robot‐assisted image guided surgical procedures.",
author = "Y. Cho and S. Kim and Jeff Siewerdsen and D. Moseley and D. Jaffray",
year = "2005",
doi = "10.1118/1.1997621",
language = "English (US)",
volume = "32",
pages = "1937",
journal = "Medical Physics",
issn = "0094-2405",
publisher = "AAPM - American Association of Physicists in Medicine",
number = "6",

}

TY - JOUR

T1 - SU‐FF‐J‐75

T2 - Geometric Calibration of An Extended View C‐Arm Platform for Cone‐Beam CT

AU - Cho, Y.

AU - Kim, S.

AU - Siewerdsen, Jeff

AU - Moseley, D.

AU - Jaffray, D.

PY - 2005

Y1 - 2005

N2 - Purpose: A mobile C‐arm with a versatile detector mount (providing extended field‐of‐view) has been developed for multi‐mode fluoroscopy and cone‐beam CT image‐guidance of surgical procedures. Geometric calibration estimating a set of parameters that fully describe the geometry of the systems is essential for the accurate image reconstruction and precise surgical guidance. We have developed a general analytic method to calibrate this system. Method and Materials: The platform for the extended view C‐arm for Cone‐beam CT is a Siemens PowerMobil. Field of view can be extended originally from 18×24 to 18×40 cm2 with the computer controlled linear guide system attached to the arm to displace the position of the imaging detector. It allows imaging objects such as pelvis of patients on C‐arm. The calibration phantom, modified to fit in the field of view, consists of 16 ball bearings precisely located in two circular trajectories in a cylindrical plastic phantom. All the geometric parameters including source position, and detector position and rotation with respect to gantry angle are found at various detector shifts. The calibration algorithm previously developed and verified at the cone‐beam CT systems on optical bench and clinical linear accelerator was applied. Results: The uncertainty of the calibration algorithm is less than 0.6° (out of plan) and 0.01° (in plan) in detector angles, 0.01mm (normal to the beam direction) and 1.4mm (beam direction) in x‐ray source/detector position. Repeatability of the center of the detector in various gantry angle and detector shift was less than 1 pixel size. Optimal weight of the counter valance for precise motion of the extended view C‐arm was also found using the calibration parameters. Conclusion: Overall, a robust method has been developed for an accurate geometric calibration of systems demonstrating non‐ideal trajectory. This will allow an accurate cone‐beam CT reconstruction and manual/robot‐assisted image guided surgical procedures.

AB - Purpose: A mobile C‐arm with a versatile detector mount (providing extended field‐of‐view) has been developed for multi‐mode fluoroscopy and cone‐beam CT image‐guidance of surgical procedures. Geometric calibration estimating a set of parameters that fully describe the geometry of the systems is essential for the accurate image reconstruction and precise surgical guidance. We have developed a general analytic method to calibrate this system. Method and Materials: The platform for the extended view C‐arm for Cone‐beam CT is a Siemens PowerMobil. Field of view can be extended originally from 18×24 to 18×40 cm2 with the computer controlled linear guide system attached to the arm to displace the position of the imaging detector. It allows imaging objects such as pelvis of patients on C‐arm. The calibration phantom, modified to fit in the field of view, consists of 16 ball bearings precisely located in two circular trajectories in a cylindrical plastic phantom. All the geometric parameters including source position, and detector position and rotation with respect to gantry angle are found at various detector shifts. The calibration algorithm previously developed and verified at the cone‐beam CT systems on optical bench and clinical linear accelerator was applied. Results: The uncertainty of the calibration algorithm is less than 0.6° (out of plan) and 0.01° (in plan) in detector angles, 0.01mm (normal to the beam direction) and 1.4mm (beam direction) in x‐ray source/detector position. Repeatability of the center of the detector in various gantry angle and detector shift was less than 1 pixel size. Optimal weight of the counter valance for precise motion of the extended view C‐arm was also found using the calibration parameters. Conclusion: Overall, a robust method has been developed for an accurate geometric calibration of systems demonstrating non‐ideal trajectory. This will allow an accurate cone‐beam CT reconstruction and manual/robot‐assisted image guided surgical procedures.

UR - http://www.scopus.com/inward/record.url?scp=85024826050&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85024826050&partnerID=8YFLogxK

U2 - 10.1118/1.1997621

DO - 10.1118/1.1997621

M3 - Article

AN - SCOPUS:85024826050

VL - 32

SP - 1937

JO - Medical Physics

JF - Medical Physics

SN - 0094-2405

IS - 6

ER -