Nose-only inhalation system using the fluidized-bed generation system for coexposures to carbon black and formaldehyde

David R.R. Hernenway, George J. Jakab, Terence H. Risby, Shelley S. Sehnert, Stephen M. Bowes, Robert Hrnieleski

Research output: Contribution to journalArticlepeer-review

Abstract

The purpose of this research was to develop a nose-only inhalation toxicology system for exposing animals to carbon black and formaldehyde - both individually and in combination. This study discusses the modifications necessary to use a fluidized-bed generator to generate carbon black in the concentration range of 0.5-20 mg/m3 with a mass median aerodynamic diameter of approximately 2.5 μm. The specific recommendations involve changing the size and placement of the delivery and overflow tubes as well as installing a motorized ball valve to automate delivery of premixed bed material and carbon black to the generator. The inhalation chamber was modified from a previously published design. By using a cyclone preclassifier to remove the nonrespirable fraction of the aerosol and a laminar flow element to reduce inlet vortic-ity, it was possible to obtain a uniform chamber concentration with less than ±25% overall variation. The formaldehyde generation system produced stable concentrations in the range of 0.5-20 ppm with a variability of less than ±10% Combined carbon black and formaldehyde generation resulted in less than 0.3% by weight of formaldehyde being bound to the carbon black particles based on both theoretical considerations and actual measurement.

Original languageEnglish (US)
Pages (from-to)69-89
Number of pages21
JournalInhalation Toxicology
Volume2
Issue number1
DOIs
StatePublished - 1990

ASJC Scopus subject areas

  • Toxicology
  • Health, Toxicology and Mutagenesis

Fingerprint Dive into the research topics of 'Nose-only inhalation system using the fluidized-bed generation system for coexposures to carbon black and formaldehyde'. Together they form a unique fingerprint.

Cite this