Macrophages and fibroblasts respond differently to PMMA particles and mechanical strain

Lynne C. Jones, Michelle Tucci, Carmelita Frondoza

Research output: Contribution to journalArticle

Abstract

A primary factor limiting the long-term outcome of total joint arthroplasty is the aseptic loosening of prosthetic components. The bone-host interface of an unstable implant is associated with large quantities of wear debris as well as an altered mechanical environment. In vitro cellular studies on the effects of particulate biomaterials have been conducted under static conditions. The principal objective of this study was to test the hypothesis that the application of cyclic tensile strain to cultured macrophages and fibroblasts alters the response of these cells to particulate polymethylmethacrylate. P388D1 macrophages and three human synovial fibroblast cells were exposed to particulate PMMA (0, 0.4, 4.0, and 40.0 mg/well) (n=3) and tested under static or dynamic [cyclic tensile strain (0.5 Hz, 0.2 strain)] conditions. Cellular proliferation was determined by autoradiography following 3H- thymidine incorporation. IL-1β, TNF-α, and IL-6 were identified using immunocytochemistry. Exposure of macrophages to particulate PMMA and/or cyclic tensile strain resulted in a decrease in DNA synthesis. Neither treatment altered the proliferative capacity of fibroblasts. Macrophages and fibroblasts stained positively for IL-1β, TNF-α, and IL-6 under all of the experimental conditions tested. Our study provides evidence that macrophages, but not fibroblasts, exhibit decreased proliferative capacity when exposed to particulate PMMA and mechanical stimuli.

Original languageEnglish (US)
Pages (from-to)223-230
Number of pages8
JournalBiomedical Sciences Instrumentation
Volume42
StatePublished - Apr 2006

Fingerprint

Macrophages
Polymethyl Methacrylate
Fibroblasts
Tensile strain
Interleukin-1
Interleukin-6
Arthroplasty
Biocompatible Materials
Prosthetics
Autoradiography
Debris
Biomaterials
Thymidine
Bone
DNA
Joints
Immunohistochemistry
Cells
Cell Proliferation
Wear of materials

Keywords

  • Cellular response
  • Cyclic tensile strain
  • Fibroblasts
  • Macrophages
  • Participate PMMA

ASJC Scopus subject areas

  • Hardware and Architecture

Cite this

Macrophages and fibroblasts respond differently to PMMA particles and mechanical strain. / Jones, Lynne C.; Tucci, Michelle; Frondoza, Carmelita.

In: Biomedical Sciences Instrumentation, Vol. 42, 04.2006, p. 223-230.

Research output: Contribution to journalArticle

Jones, Lynne C. ; Tucci, Michelle ; Frondoza, Carmelita. / Macrophages and fibroblasts respond differently to PMMA particles and mechanical strain. In: Biomedical Sciences Instrumentation. 2006 ; Vol. 42. pp. 223-230.
@article{524fc5fe197f4924ba904725e7c64360,
title = "Macrophages and fibroblasts respond differently to PMMA particles and mechanical strain",
abstract = "A primary factor limiting the long-term outcome of total joint arthroplasty is the aseptic loosening of prosthetic components. The bone-host interface of an unstable implant is associated with large quantities of wear debris as well as an altered mechanical environment. In vitro cellular studies on the effects of particulate biomaterials have been conducted under static conditions. The principal objective of this study was to test the hypothesis that the application of cyclic tensile strain to cultured macrophages and fibroblasts alters the response of these cells to particulate polymethylmethacrylate. P388D1 macrophages and three human synovial fibroblast cells were exposed to particulate PMMA (0, 0.4, 4.0, and 40.0 mg/well) (n=3) and tested under static or dynamic [cyclic tensile strain (0.5 Hz, 0.2 strain)] conditions. Cellular proliferation was determined by autoradiography following 3H- thymidine incorporation. IL-1β, TNF-α, and IL-6 were identified using immunocytochemistry. Exposure of macrophages to particulate PMMA and/or cyclic tensile strain resulted in a decrease in DNA synthesis. Neither treatment altered the proliferative capacity of fibroblasts. Macrophages and fibroblasts stained positively for IL-1β, TNF-α, and IL-6 under all of the experimental conditions tested. Our study provides evidence that macrophages, but not fibroblasts, exhibit decreased proliferative capacity when exposed to particulate PMMA and mechanical stimuli.",
keywords = "Cellular response, Cyclic tensile strain, Fibroblasts, Macrophages, Participate PMMA",
author = "Jones, {Lynne C.} and Michelle Tucci and Carmelita Frondoza",
year = "2006",
month = "4",
language = "English (US)",
volume = "42",
pages = "223--230",
journal = "Biomedical Sciences Instrumentation",
issn = "0067-8856",
publisher = "ISA - Instrumentation, Systems, and Automation Society",

}

TY - JOUR

T1 - Macrophages and fibroblasts respond differently to PMMA particles and mechanical strain

AU - Jones, Lynne C.

AU - Tucci, Michelle

AU - Frondoza, Carmelita

PY - 2006/4

Y1 - 2006/4

N2 - A primary factor limiting the long-term outcome of total joint arthroplasty is the aseptic loosening of prosthetic components. The bone-host interface of an unstable implant is associated with large quantities of wear debris as well as an altered mechanical environment. In vitro cellular studies on the effects of particulate biomaterials have been conducted under static conditions. The principal objective of this study was to test the hypothesis that the application of cyclic tensile strain to cultured macrophages and fibroblasts alters the response of these cells to particulate polymethylmethacrylate. P388D1 macrophages and three human synovial fibroblast cells were exposed to particulate PMMA (0, 0.4, 4.0, and 40.0 mg/well) (n=3) and tested under static or dynamic [cyclic tensile strain (0.5 Hz, 0.2 strain)] conditions. Cellular proliferation was determined by autoradiography following 3H- thymidine incorporation. IL-1β, TNF-α, and IL-6 were identified using immunocytochemistry. Exposure of macrophages to particulate PMMA and/or cyclic tensile strain resulted in a decrease in DNA synthesis. Neither treatment altered the proliferative capacity of fibroblasts. Macrophages and fibroblasts stained positively for IL-1β, TNF-α, and IL-6 under all of the experimental conditions tested. Our study provides evidence that macrophages, but not fibroblasts, exhibit decreased proliferative capacity when exposed to particulate PMMA and mechanical stimuli.

AB - A primary factor limiting the long-term outcome of total joint arthroplasty is the aseptic loosening of prosthetic components. The bone-host interface of an unstable implant is associated with large quantities of wear debris as well as an altered mechanical environment. In vitro cellular studies on the effects of particulate biomaterials have been conducted under static conditions. The principal objective of this study was to test the hypothesis that the application of cyclic tensile strain to cultured macrophages and fibroblasts alters the response of these cells to particulate polymethylmethacrylate. P388D1 macrophages and three human synovial fibroblast cells were exposed to particulate PMMA (0, 0.4, 4.0, and 40.0 mg/well) (n=3) and tested under static or dynamic [cyclic tensile strain (0.5 Hz, 0.2 strain)] conditions. Cellular proliferation was determined by autoradiography following 3H- thymidine incorporation. IL-1β, TNF-α, and IL-6 were identified using immunocytochemistry. Exposure of macrophages to particulate PMMA and/or cyclic tensile strain resulted in a decrease in DNA synthesis. Neither treatment altered the proliferative capacity of fibroblasts. Macrophages and fibroblasts stained positively for IL-1β, TNF-α, and IL-6 under all of the experimental conditions tested. Our study provides evidence that macrophages, but not fibroblasts, exhibit decreased proliferative capacity when exposed to particulate PMMA and mechanical stimuli.

KW - Cellular response

KW - Cyclic tensile strain

KW - Fibroblasts

KW - Macrophages

KW - Participate PMMA

UR - http://www.scopus.com/inward/record.url?scp=33745192300&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33745192300&partnerID=8YFLogxK

M3 - Article

C2 - 16817612

VL - 42

SP - 223

EP - 230

JO - Biomedical Sciences Instrumentation

JF - Biomedical Sciences Instrumentation

SN - 0067-8856

ER -