Laser skin welding: In vivo tensile strength and wound healing results

Nathaniel M. Fried, Joseph T. Walsh

Research output: Contribution to journalArticle

Abstract

Background and Objective: Laser skin welding was investigated as a general model for laser tissue closure. Scanned delivery of near-infrared laser radiation in combination with a dye can produce strong welds with limited thermal damage. Study Design/Materials and Methods: Two-centimeter-long, full-thickness incisions were made on the backs of guinea pigs. Wounds were closed either by laser welding or sutures and then biopsied at 0, 3, 6, 10, 14, 21, and 28 days postoperatively. Welding was achieved by using continuous-wave, 1.06-μm, Nd:YAG laser radiation scanned over the incisions to produce a dwell time of ~80 msec. The cooling time between scans was fixed at 8 seconds. A 4-mm-diameter laser spot was maintained during the experiments, and the power was kept constant at 10 W. The operation time was fixed at 10 minutes per incision. India ink was used as an absorber of the laser radiation at the weld site, and clamps were used temporarily to appose the incision edges. Results: Acute weld strengths of 2.1 ± 0.7 kg/cm2 were significantly higher than suture apposition strengths of 0.4 ± 0.1 kg/cm2 (P <0.01), and weld strengths continued to increase over time. Lateral thermal damage in the laser welds was limited to 200 ± 40 μm near the epiderreal surface with less thermal damage deeper within the dermis. Conclusion: Our welding technique produced higher weld strengths and less thermal damage than reported in previous skin welding studies and may represent an alternative to sutures. (C) 2000 Wiley-Liss, Inc.

Original languageEnglish (US)
Pages (from-to)55-65
Number of pages11
JournalLasers in Surgery and Medicine
Volume27
Issue number1
DOIs
StatePublished - 2000

Fingerprint

Welding
Tensile Strength
Wound Healing
Lasers
Skin
Hot Temperature
Sutures
Radiation
Solid-State Lasers
Dermis
Guinea Pigs
Coloring Agents
Wounds and Injuries

Keywords

  • Infrared radiation
  • Laser
  • Skin closure
  • Tissue welding

ASJC Scopus subject areas

  • Surgery

Cite this

Laser skin welding : In vivo tensile strength and wound healing results. / Fried, Nathaniel M.; Walsh, Joseph T.

In: Lasers in Surgery and Medicine, Vol. 27, No. 1, 2000, p. 55-65.

Research output: Contribution to journalArticle

Fried, Nathaniel M. ; Walsh, Joseph T. / Laser skin welding : In vivo tensile strength and wound healing results. In: Lasers in Surgery and Medicine. 2000 ; Vol. 27, No. 1. pp. 55-65.
@article{78e3a6efa0424b5686d105d46cd49ef6,
title = "Laser skin welding: In vivo tensile strength and wound healing results",
abstract = "Background and Objective: Laser skin welding was investigated as a general model for laser tissue closure. Scanned delivery of near-infrared laser radiation in combination with a dye can produce strong welds with limited thermal damage. Study Design/Materials and Methods: Two-centimeter-long, full-thickness incisions were made on the backs of guinea pigs. Wounds were closed either by laser welding or sutures and then biopsied at 0, 3, 6, 10, 14, 21, and 28 days postoperatively. Welding was achieved by using continuous-wave, 1.06-μm, Nd:YAG laser radiation scanned over the incisions to produce a dwell time of ~80 msec. The cooling time between scans was fixed at 8 seconds. A 4-mm-diameter laser spot was maintained during the experiments, and the power was kept constant at 10 W. The operation time was fixed at 10 minutes per incision. India ink was used as an absorber of the laser radiation at the weld site, and clamps were used temporarily to appose the incision edges. Results: Acute weld strengths of 2.1 ± 0.7 kg/cm2 were significantly higher than suture apposition strengths of 0.4 ± 0.1 kg/cm2 (P <0.01), and weld strengths continued to increase over time. Lateral thermal damage in the laser welds was limited to 200 ± 40 μm near the epiderreal surface with less thermal damage deeper within the dermis. Conclusion: Our welding technique produced higher weld strengths and less thermal damage than reported in previous skin welding studies and may represent an alternative to sutures. (C) 2000 Wiley-Liss, Inc.",
keywords = "Infrared radiation, Laser, Skin closure, Tissue welding",
author = "Fried, {Nathaniel M.} and Walsh, {Joseph T.}",
year = "2000",
doi = "10.1002/1096-9101(2000)27:1<55::AID-LSM8>3.0.CO;2-5",
language = "English (US)",
volume = "27",
pages = "55--65",
journal = "Lasers in Surgery and Medicine",
issn = "0196-8092",
publisher = "Wiley-Liss Inc.",
number = "1",

}

TY - JOUR

T1 - Laser skin welding

T2 - In vivo tensile strength and wound healing results

AU - Fried, Nathaniel M.

AU - Walsh, Joseph T.

PY - 2000

Y1 - 2000

N2 - Background and Objective: Laser skin welding was investigated as a general model for laser tissue closure. Scanned delivery of near-infrared laser radiation in combination with a dye can produce strong welds with limited thermal damage. Study Design/Materials and Methods: Two-centimeter-long, full-thickness incisions were made on the backs of guinea pigs. Wounds were closed either by laser welding or sutures and then biopsied at 0, 3, 6, 10, 14, 21, and 28 days postoperatively. Welding was achieved by using continuous-wave, 1.06-μm, Nd:YAG laser radiation scanned over the incisions to produce a dwell time of ~80 msec. The cooling time between scans was fixed at 8 seconds. A 4-mm-diameter laser spot was maintained during the experiments, and the power was kept constant at 10 W. The operation time was fixed at 10 minutes per incision. India ink was used as an absorber of the laser radiation at the weld site, and clamps were used temporarily to appose the incision edges. Results: Acute weld strengths of 2.1 ± 0.7 kg/cm2 were significantly higher than suture apposition strengths of 0.4 ± 0.1 kg/cm2 (P <0.01), and weld strengths continued to increase over time. Lateral thermal damage in the laser welds was limited to 200 ± 40 μm near the epiderreal surface with less thermal damage deeper within the dermis. Conclusion: Our welding technique produced higher weld strengths and less thermal damage than reported in previous skin welding studies and may represent an alternative to sutures. (C) 2000 Wiley-Liss, Inc.

AB - Background and Objective: Laser skin welding was investigated as a general model for laser tissue closure. Scanned delivery of near-infrared laser radiation in combination with a dye can produce strong welds with limited thermal damage. Study Design/Materials and Methods: Two-centimeter-long, full-thickness incisions were made on the backs of guinea pigs. Wounds were closed either by laser welding or sutures and then biopsied at 0, 3, 6, 10, 14, 21, and 28 days postoperatively. Welding was achieved by using continuous-wave, 1.06-μm, Nd:YAG laser radiation scanned over the incisions to produce a dwell time of ~80 msec. The cooling time between scans was fixed at 8 seconds. A 4-mm-diameter laser spot was maintained during the experiments, and the power was kept constant at 10 W. The operation time was fixed at 10 minutes per incision. India ink was used as an absorber of the laser radiation at the weld site, and clamps were used temporarily to appose the incision edges. Results: Acute weld strengths of 2.1 ± 0.7 kg/cm2 were significantly higher than suture apposition strengths of 0.4 ± 0.1 kg/cm2 (P <0.01), and weld strengths continued to increase over time. Lateral thermal damage in the laser welds was limited to 200 ± 40 μm near the epiderreal surface with less thermal damage deeper within the dermis. Conclusion: Our welding technique produced higher weld strengths and less thermal damage than reported in previous skin welding studies and may represent an alternative to sutures. (C) 2000 Wiley-Liss, Inc.

KW - Infrared radiation

KW - Laser

KW - Skin closure

KW - Tissue welding

UR - http://www.scopus.com/inward/record.url?scp=0033854282&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0033854282&partnerID=8YFLogxK

U2 - 10.1002/1096-9101(2000)27:1<55::AID-LSM8>3.0.CO;2-5

DO - 10.1002/1096-9101(2000)27:1<55::AID-LSM8>3.0.CO;2-5

M3 - Article

C2 - 10918294

AN - SCOPUS:0033854282

VL - 27

SP - 55

EP - 65

JO - Lasers in Surgery and Medicine

JF - Lasers in Surgery and Medicine

SN - 0196-8092

IS - 1

ER -