Electrogenerated indium tin oxide-coated glass surface with photosensitive interfaces

Surface analysis

Tania Konry, Mounir Bouhifd, Serge Cosnier, Maurice Whelan, Andrea Valsesia, Francois Rossi, Robert S. Marks

Research output: Contribution to journalArticle

Abstract

We present herein a photo-immobilization technique for the localized and specific conjugation of biochip platforms with different proteinaceous bioreceptors, such as antigen or antibodies. This methodology based on a photoactivable electrogenerated polymer film, pyrrole-benzophenone, allows the covalent immobilization of biomolecules through light mediation. The surface-conductive glass platform electropolymerized with poly(pyrrole-benzophenone) thin film may then be used to affinity-coat the chip with molecular recognition probes. This glass chip electroconductive surface modification is done by the deposition of a thin layer of indium tin oxide (ITO). Thereafter, pyrrole-benzophenone monomers are electropolymerized onto the conductive metal oxide surface and then exposed to an antigen Staphylococcal Enterotoxin B (SEB)) solution and illuminated with UV light (wavelength ∼345 nm) through a mask. As a result of the photochemical reaction, a pattern thin layer of the antigen was covalently bound to the benzophenone-modified surface. Then the sample to be analyzed, along with its specific target antibody (anti-SEB antibodies), is introduced onto the glass surface and left to react with the previously photo-immobilized antigen. When the immuno-reaction is completed, the specifically attached immunoglobulin analytes are detected by using secondary antibodies conjugated with Fluorescein isothiocyanate (FITC). The fluorescence signal emanating from the biochip surface is then quantified by two methods, using a filtered intensified charge-coupled device (CCD) camera and a grating spectrometer.

Original languageEnglish (US)
Pages (from-to)2230-2236
Number of pages7
JournalBiosensors and Bioelectronics
Volume22
Issue number9-10
DOIs
StatePublished - Apr 15 2007
Externally publishedYes

Fingerprint

Surface analysis
Tin oxides
Indium
Glass
Antigens
Antibodies
Pyrroles
Biochips
Immobilization
Molecular Probes
Ultraviolet Rays
Masks
Fluorescein
Molecular recognition
Oxides
Photochemical reactions
Diffraction gratings
Immunoglobulins
Biomolecules
Anti-Idiotypic Antibodies

Keywords

  • AFM
  • Antibodies
  • CCD
  • FITC
  • Staphylococcal Enterotoxin B

ASJC Scopus subject areas

  • Biotechnology
  • Analytical Chemistry
  • Electrochemistry

Cite this

Konry, T., Bouhifd, M., Cosnier, S., Whelan, M., Valsesia, A., Rossi, F., & Marks, R. S. (2007). Electrogenerated indium tin oxide-coated glass surface with photosensitive interfaces: Surface analysis. Biosensors and Bioelectronics, 22(9-10), 2230-2236. https://doi.org/10.1016/j.bios.2006.10.032

Electrogenerated indium tin oxide-coated glass surface with photosensitive interfaces : Surface analysis. / Konry, Tania; Bouhifd, Mounir; Cosnier, Serge; Whelan, Maurice; Valsesia, Andrea; Rossi, Francois; Marks, Robert S.

In: Biosensors and Bioelectronics, Vol. 22, No. 9-10, 15.04.2007, p. 2230-2236.

Research output: Contribution to journalArticle

Konry, T, Bouhifd, M, Cosnier, S, Whelan, M, Valsesia, A, Rossi, F & Marks, RS 2007, 'Electrogenerated indium tin oxide-coated glass surface with photosensitive interfaces: Surface analysis', Biosensors and Bioelectronics, vol. 22, no. 9-10, pp. 2230-2236. https://doi.org/10.1016/j.bios.2006.10.032
Konry, Tania ; Bouhifd, Mounir ; Cosnier, Serge ; Whelan, Maurice ; Valsesia, Andrea ; Rossi, Francois ; Marks, Robert S. / Electrogenerated indium tin oxide-coated glass surface with photosensitive interfaces : Surface analysis. In: Biosensors and Bioelectronics. 2007 ; Vol. 22, No. 9-10. pp. 2230-2236.
@article{22069890ac694be6aa8c16f155b0ed61,
title = "Electrogenerated indium tin oxide-coated glass surface with photosensitive interfaces: Surface analysis",
abstract = "We present herein a photo-immobilization technique for the localized and specific conjugation of biochip platforms with different proteinaceous bioreceptors, such as antigen or antibodies. This methodology based on a photoactivable electrogenerated polymer film, pyrrole-benzophenone, allows the covalent immobilization of biomolecules through light mediation. The surface-conductive glass platform electropolymerized with poly(pyrrole-benzophenone) thin film may then be used to affinity-coat the chip with molecular recognition probes. This glass chip electroconductive surface modification is done by the deposition of a thin layer of indium tin oxide (ITO). Thereafter, pyrrole-benzophenone monomers are electropolymerized onto the conductive metal oxide surface and then exposed to an antigen Staphylococcal Enterotoxin B (SEB)) solution and illuminated with UV light (wavelength ∼345 nm) through a mask. As a result of the photochemical reaction, a pattern thin layer of the antigen was covalently bound to the benzophenone-modified surface. Then the sample to be analyzed, along with its specific target antibody (anti-SEB antibodies), is introduced onto the glass surface and left to react with the previously photo-immobilized antigen. When the immuno-reaction is completed, the specifically attached immunoglobulin analytes are detected by using secondary antibodies conjugated with Fluorescein isothiocyanate (FITC). The fluorescence signal emanating from the biochip surface is then quantified by two methods, using a filtered intensified charge-coupled device (CCD) camera and a grating spectrometer.",
keywords = "AFM, Antibodies, CCD, FITC, Staphylococcal Enterotoxin B",
author = "Tania Konry and Mounir Bouhifd and Serge Cosnier and Maurice Whelan and Andrea Valsesia and Francois Rossi and Marks, {Robert S.}",
year = "2007",
month = "4",
day = "15",
doi = "10.1016/j.bios.2006.10.032",
language = "English (US)",
volume = "22",
pages = "2230--2236",
journal = "Biosensors",
issn = "0956-5663",
publisher = "Elsevier Limited",
number = "9-10",

}

TY - JOUR

T1 - Electrogenerated indium tin oxide-coated glass surface with photosensitive interfaces

T2 - Surface analysis

AU - Konry, Tania

AU - Bouhifd, Mounir

AU - Cosnier, Serge

AU - Whelan, Maurice

AU - Valsesia, Andrea

AU - Rossi, Francois

AU - Marks, Robert S.

PY - 2007/4/15

Y1 - 2007/4/15

N2 - We present herein a photo-immobilization technique for the localized and specific conjugation of biochip platforms with different proteinaceous bioreceptors, such as antigen or antibodies. This methodology based on a photoactivable electrogenerated polymer film, pyrrole-benzophenone, allows the covalent immobilization of biomolecules through light mediation. The surface-conductive glass platform electropolymerized with poly(pyrrole-benzophenone) thin film may then be used to affinity-coat the chip with molecular recognition probes. This glass chip electroconductive surface modification is done by the deposition of a thin layer of indium tin oxide (ITO). Thereafter, pyrrole-benzophenone monomers are electropolymerized onto the conductive metal oxide surface and then exposed to an antigen Staphylococcal Enterotoxin B (SEB)) solution and illuminated with UV light (wavelength ∼345 nm) through a mask. As a result of the photochemical reaction, a pattern thin layer of the antigen was covalently bound to the benzophenone-modified surface. Then the sample to be analyzed, along with its specific target antibody (anti-SEB antibodies), is introduced onto the glass surface and left to react with the previously photo-immobilized antigen. When the immuno-reaction is completed, the specifically attached immunoglobulin analytes are detected by using secondary antibodies conjugated with Fluorescein isothiocyanate (FITC). The fluorescence signal emanating from the biochip surface is then quantified by two methods, using a filtered intensified charge-coupled device (CCD) camera and a grating spectrometer.

AB - We present herein a photo-immobilization technique for the localized and specific conjugation of biochip platforms with different proteinaceous bioreceptors, such as antigen or antibodies. This methodology based on a photoactivable electrogenerated polymer film, pyrrole-benzophenone, allows the covalent immobilization of biomolecules through light mediation. The surface-conductive glass platform electropolymerized with poly(pyrrole-benzophenone) thin film may then be used to affinity-coat the chip with molecular recognition probes. This glass chip electroconductive surface modification is done by the deposition of a thin layer of indium tin oxide (ITO). Thereafter, pyrrole-benzophenone monomers are electropolymerized onto the conductive metal oxide surface and then exposed to an antigen Staphylococcal Enterotoxin B (SEB)) solution and illuminated with UV light (wavelength ∼345 nm) through a mask. As a result of the photochemical reaction, a pattern thin layer of the antigen was covalently bound to the benzophenone-modified surface. Then the sample to be analyzed, along with its specific target antibody (anti-SEB antibodies), is introduced onto the glass surface and left to react with the previously photo-immobilized antigen. When the immuno-reaction is completed, the specifically attached immunoglobulin analytes are detected by using secondary antibodies conjugated with Fluorescein isothiocyanate (FITC). The fluorescence signal emanating from the biochip surface is then quantified by two methods, using a filtered intensified charge-coupled device (CCD) camera and a grating spectrometer.

KW - AFM

KW - Antibodies

KW - CCD

KW - FITC

KW - Staphylococcal Enterotoxin B

UR - http://www.scopus.com/inward/record.url?scp=33847382292&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33847382292&partnerID=8YFLogxK

U2 - 10.1016/j.bios.2006.10.032

DO - 10.1016/j.bios.2006.10.032

M3 - Article

VL - 22

SP - 2230

EP - 2236

JO - Biosensors

JF - Biosensors

SN - 0956-5663

IS - 9-10

ER -