Coronary magnetic resonance angiography for assessment of the stent lumen: A phantom study

David Maintz, Rene M. Botnar, Roman Fischbach, Walter Heindel, Warren J. Manning, Matthias Stuber

Research output: Contribution to journalArticle

Abstract

Purpose: To evaluate the feasibility of visualizing the stent lumen using coronary magnetic resonance angiography in vitro. Material and methods: Nineteen different coronary stents were implanted in plastic tubes with an inner diameter of 3 mm. The tubes were positioned in a plastic container filled with gel and included in a closed flow circuit (constant flow 18 cm/sec). The magnetic resonance images were obtained with a dual inversion fast spin-echo sequence. For intraluminal stent imaging, subtraction images were calculated from scans with and without flow. Subsequently, intraluminal signal properties were objectively assessed and compared. Results: As a function of the stent type, various degrees of in-stent signal attenuation were observed. Tantalum stents demonstrated minimal intraluminal signal attenuation. For nitinol stents, the stent lumen could be identified, but the intraluminal signal was markedly reduced. Steel stents resulted in the most pronounced intraluminal signal voids. Conclusions: With the present technique, radiofrequency penetration into the stents is strongly influenced by the stent material. These findings may have important implications for future stent design and stent imaging strategies.

Original languageEnglish (US)
Pages (from-to)359-367
Number of pages9
JournalJournal of Cardiovascular Magnetic Resonance
Volume4
Issue number3
DOIs
Publication statusPublished - 2002
Externally publishedYes

    Fingerprint

Keywords

  • Artifacts
  • Coronary magnetic resonance angiography
  • Magnetic resonance angiography
  • Stents and protheses

ASJC Scopus subject areas

  • Cardiology and Cardiovascular Medicine
  • Radiology Nuclear Medicine and imaging
  • Radiological and Ultrasound Technology
  • Family Practice

Cite this