Abstract
A silicon-chip based microreactor has been successfully fabricated and tested for carrying out the reaction of methanol reforming for microscale hydrogen production. The developed microreactor in combination with a micro fuel cell is proposed as an alternative to conventional portable sources of electricity such as batteries due to its ability to provide an uninterrupted supply of electricity as long as a supply of methanol and water can be provided. The microreformer-fuel cell combination has the advantage of not requiring the tedious recharging cycles needed by conventional rechargeable lithium-ion batteries. It also offers significantly higher energy storage densities, which translates into less frequent "recharging" through the refilling of methanol fuel. The microreactor consists of a network of catalyst-packed parallel microchannels of depths ranging from 200 to 400 μm with a catalyst particle filter near the outlet fabricated using photolithography and deep-reactive ion etching (DRIE) on a silicon substrate. Issues related to microchannel and filter capping, on-chip heating and temperature sensing, introduction and trapping of catalyst particles in the microchannels, flow distribution, microfluidic interfacing, and thermal insulation have been addressed. Experimental runs have demonstrated a methanol to hydrogen molar conversion of at least 85% to 90% at flow rates enough to supply hydrogen to an 8- to 10-W fuel cell.
Original language | English (US) |
---|---|
Pages (from-to) | 7-18 |
Number of pages | 12 |
Journal | Journal of Microelectromechanical Systems |
Volume | 13 |
Issue number | 1 |
DOIs | |
State | Published - Feb 2004 |
Externally published | Yes |
Keywords
- Fuel cell
- Lab-on-a-chip
- Micro fuel cells
- Microfluidics
- Microreactor
- Microreformer
- System-on-chip
ASJC Scopus subject areas
- Electrical and Electronic Engineering
- Mechanical Engineering